Instructions

Instructions for use

Placing the sticker is easy because of the transparent transfer film affixed to the sticker. All you have to do is gradually remove the white backing paper, to apply the sticker to the wall or to the item to be decorated and then push out any bubbles with the tool supplied with every sticker. You can then delicately remove the transparent transfer film and the job is done!

How to put a sticker big size ?

1 . Place the sticker on a flat surface and smooth it with the tool provided.

2 . At the top of the sticker, fold over about 4cm of the white backing paper .

3 . Position the sticker and stick it to the place where only the transparent transfer film remains.

4 . As you stick on the sticker, pull back the white backing paper.

5 . Only the sticker and the transfer film remain, firmly stick down the sticker.

6 . Carefully peel off the transparent film, peeling it away from the flat surface. Make sure the sticker adheres to the surface.

7 . There you are! Your sticker is in position, if there are any air bubbles, pierce them with a sharp needle.

Thank you from Fanastick and see you again very soon!!!